Performance of air knife heating fan

Comparison of industrial hot fan and general heat pipe:
1、The use of Qixingyuan aluminum alloy air knife , free of iron, avoid oxidation and burn out iron heat wire, easy to oxidize and burn off
2、Electric thermal wire with suspension hidden in the ceramic hole, Hot air can pass evenly from both sides of the wire, Large air volume, less wind resistance, low temperature of electric heat wire, heating wire is tied to the porcelain column. Hot air pass from one side with less wind, Large wind resistance and high temperature of electric wire
3、 Heat core design using lower surface power density, unit area heat temperature is lower, so the service life of electric wire is longer electric wire surface power density is higher, easy to age, short service life
4、Built-in over-temperature protection device, with dry burn prevention function, to avoid the electric wire due to dry burn and temperature control device to adjust the air temperature without this function
5、Which can be used without interruption for a long time, and can be installed inside the device as a high temperature hot air source Most do not consider this function
Qixingyuan air knife: suitable for dusting, cutting water, drying, cleaning, cooling occasions. Such as vegetable and fruit cleaning after water-cutting drying treatment. The opening of the bag during the packing operation. Pre-treatment before electroplating or painting. Cleaning of dust from conveyor belt and operating environment. It can also be used for rapid heating, thawing and high temperature sterilization of food and medicine.
Qixingyuan stainless steel air knife with 304 mirror stainless steel, with good corrosion resistance and aesthetics reasonable shunt plate structure, so that more uniform air intake caliber and a variety of air inlet options, easy to install air outlet width adjustable (minimum 0.3mm), maximum wind speed 200m/s, pressure resistance 2kgf/cm2 has good temperature resistance, (up to 250° C), can be directly supported by hot fan use, speed up the drying speed, improve the efficiency of the general use of wind source for eddy current air pump, special requirements can also use high pressure centrifugal fan, air compressor rapid water.