What are the adjustment methods of air knife?

What are the adjustment methods of air knife?

Before, I told you about some principle equipment and installation of the air knife, but some users have new questions recently. They are curious about the mediation methods of the air knife. Speaking of which, it is also normal. After all, the position of the air knife cannot be unchanged forever. Some manufacturers in order to be able to put in their desired position or Angle is to want to put through their own mediation. What are the mediation methods about air knife? The air knife manufacturer has obtained the following points:

Angle of air knife and distance from glass

1. First lock the screw for adjusting the height of the air knife, loosen the nut for adjusting the Angle on both sides of the air knife, and put the Angle gauge on the air knife to adjust it.

2. Upair knife: 58°/122°, downair knife: 120°/60°, distance between upair and downair knife and glass

3. Adjust the Angle and lock the nuts on both sides, loosen the nuts for adjusting the height of the upper and lower blades, and put the glass with a thickness of 0.33mm on the upper and lower blades.

4. Air knife 5mm from the glass, — air knife 4mm from the glass

The above points are the mediation method of air knife summarized by Qixing Source machinery. I hope it can help users and enterprises in need. The circular air knife